How to MIG Weld Lighted Globes | HobartWelders

How to MIG Weld Lighted Globes

Print Article
Share
Follow step-by-step instructions on how to weld Lighted Globes using the Handler 140® MIG welder. 
DOWNLOAD PROJECT PLAN

Tools and Materials Needed:

  • Handler 140® MIG welder
  • Angle grinder with cut off wheel or band saw
  • Clamps
  • Paint
  • Metal roller to form rings (optional)
  • 2’ globe: 1/2” x 1/8” x 6.28’ flat bar (6pcs) 
  • 3’ globe: 1/2” x 1/8” x 9.42’ flat bar (6pcs)
  • 4’ globe: 1” x 1/8” x 12.57’ flat bar (7pcs)

Steps:

Cut the flat bar to desired length.
Form flat bar into a ring with a roller or by hand.
Repeat process to create additional rings.
Use scrap flat stock & clamps to secure ring ends together.
Weld the first ring.
Weld the second ring.
Weld first four rings as shown.
Turn glove 90 degrees and weld remaining rings.
Weld around the globe where rings intersect.
DOWNLOAD PROJECT PLAN

Related Products

Handler® 140 MIG Welder Welds 24 gauge up to 1/4 in. (6.4 mm) thick steel. MIG Ready. Amp range of 25 - 140A.
Published: