Handler® 140EZ MIG Welder | HobartWelders

Handler® 140EZ MIG Welder

500582
Welds 24 gauge up to 3/16 in.thick steel. MIG Ready. Amp range of 30 - 140A.

Features

What's Included

  • Comfortable 10 ft. (3m) HR-100 gun
  • Owner's manual with installation, operation and maintenance guidelines.
  • 10 ft. (3 m) work cable with clamp
  • Built-in gas solenoid valve and dual-gauge regulator with gas hose
  • Spool hub assembly accommodates 4 or 8 in. spools
  • .030 in. (0.8mm) contact tips
  • Quick Select™ drive roll for .024 in. (0.6mm) or .030/.035 in. (08/.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
  • Power cord with plug
  • Welding guide and material thickness gauge
Arc Performance
Smooth, stable arc on all thicknesses allows you the best arc possible.
Spool gun ready
Easy setup for welding aluminum with no additional interface.
Quick Select drive roll
Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire.
Industrial cast aluminum wire drive system
Durable wire feed provides you professional performance

Not Included

  • Shielding gas and safety equipment not included.

Specifications

Product Literature

Handler 140EZ 299171

Processes

Flux Cored (FCAW)
MIG (GMAW)

General Specifications

Title Handler® 140EZ MIG Welder
Applications Automotive Welding
Car Restoration
Garage/Shop
Metal Art
Stainless Steel
Welding Aluminum
Welding Projects
Industries Auto Repair
Construction and Fabrication
Farm and Ranch
Amperage 30 A - 140 A
Material Thickness Mild Steel 24 ga. (0.5 mm) - 1/4 in. (6.4 mm)
Weldable Metals Aluminum
Stainless Steel
Steel
Current Type DC
Rated Output 90 A @ 30% duty cycle
Max Open Circuit Voltage 30 VDC
Wire Feed Speed 15 IPM - 360 IPM
Wire Diameter Stainless 0.024 in. - 0.035 in.
Stainless 0.6 mm. - 0.9 mm.
Solid Steel 0.6 mm. - 0.9 mm.
Solid Steel 0.024 in. - 0.035 in.
Flux Cored 0.03 in. - 0.035 in.
Flux Cored 0.8 mm. - 0.9 mm.
Spool Size 4 or 8 in.
Metal Type Aluminum
Mild Steel
Stainless Steel
Portability Handle(s)
Weld Output CV
Input Voltage 110/115/120 V
Input Phase 1-Phase
Input Hz 60 Hz
Net Width 9.8 in
Net Height 14.3 in
Net Length 19.6 in
Net Weight 53 lbs
Warranty Hobart Warranty

Accessories

Hobart Spoolrunner 150 Direct Plug-in Spool Gun

For use with Handler140EZ, to help eliminate feeding problems associated with soft aluminum wire.
Hobart® Running Gear/Cylinder Rack

Accepts gas bottles up to 7 inches in diameter and 33 in. tall, maximum 75 lbs. Assembled dimensions: 18 inches high x 30 inches length x 12.5 inches wide. Welder shelf dimensions: 12.5 inches x 19.75 inches. Assembly required.
Hobart® Protective Cover for Handler® and Multi-Handler™ Welders

Vinyl laminated cover to protect the finish of your Handler® or Multi-Handler™ welder (all part numbers). This durable cover resists stains and mildew while handy pockets allow for storage of power cables, torch assemblies and work cables.

Flowgauge Regulator 10-50 SCFH with 5' Hose

Durable dual-filter regulator with hose for use with MIG and TIG Welders. Recommended for shielding gases Argon, Argon/Co2 mix.

Consumables

.023 Contact Tip

0.023 inch contact tips compatible for use with Handler 140, 187, 190, 210, 210MVP, TREK 180 and IronMan 230/240 and 250, Millermatics, and later Hobart Beta-MIG 1800 and 2510 welders.
.030 Contact Tip

0.030 inch contact tips compatible for use with Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100, IronMan 230/240 & later Hobart Beta-MIG 1800 and 2510 welders.
.035 Contact Tip

0.035 inch contact tips for use with the Hobart Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100 & IronMan 230/240 & later Hobart Beta-MIG 1800 and 2510 welders.
Slip Type MIG Nozzle, 1/2"

This 1/2" slip type MIG nozzle fits most Hobart Handler® models and Auto Arc 130 models.

Reviews & Ratings

Question & Answers