Multi-Handler 200 | HobartWelders

Multi-Handler 200 Multiprocess Welder

500578
Multiprocess capabilities in a lightweight, versatile machine.
Spec Sheet (English)
hobart generic gift box Make sure to buy from an authorized Hobart® retailer. FIND RETAILER

Features

What's Included

  • Comfortable 10 ft. (3m) HR-100 gun
  • 10 ft. (3 m) electrode cable with heavy-duty holder
  • 10 ft.(3m) work cable with clamp
  • Power cord and MVP plugs for 120 and 240 V
  • Built-in gas solenoid valve and dual-gauge regulator with gas hose.
  • Sample spool of .030 in. (0.8 mm) solid wire
  • Quick Select (TM) drive roll for .024 in (0.6mm) or .030/.035 in. (0.8/0/9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
  • .030 and .035 contact tips
  • Material Thickness Gauge
  • Insulator nozzles (#4,#5,#6), collet, collet body, electrode with 1/16 and 3/32 in. tungsten
  • 12.5 ft. (3.8 m) TIG torch with backcap, nozzle
Multiprocess Capabilities
Versatility with one machine that provides MIG, DC TIG and stick capabilities.
Easy-to-use Interface
With two knobs and a process button, setting up or changing over this machine is quick.
Dual-Voltage
Allows you to connect to common 120- or 240-volt power receptacles without the use of any tools — simply choose the plug that fits the receptacle.
Quick Select Drive Roll
Makes setup quicker by offering three grooves — two for different size solid wire and a third for flux-cored wire.
Spool Gun Ready
Spool guns enhance feedability and reduce “bird-nesting” associated with soft aluminum wires. No additional control box or adapter is required to connect the SpoolRunner™ 100 spool gun.
Run in Technology
Experience smooth, spatter-free starts. The run-in feature automatically slows the wire feed speed to a pre-set speed prior to arc initiation, improving arc starts.
Hobart 5/3/1 Warranty
Five-year warranty on transformers, stabilizers and main rectifiers; three years on generators, PC boards and drive systems; and one year on guns (MIG, plasma and TIG torches).

Not Included

  • RFCS-RJ45 remote foot control
  • Shielding gas and safety equipment not included.

Specifications

Product Literature

Multi-Handler 200 287909

Processes

Flux Cored (FCAW)
MIG (GMAW)
Stick (SMAW)
TIG DC (GTAW-DC)

General Specifications

Title Multi-Handler 200 Multiprocess Welder
Industries Interests Racing
Farm and Ranch
Amperage 30 A - 200 A
Material Thickness Mild Steel 24 ga. (0.5 mm) - 3/8 in. (9.5 mm)
Input Phase 1-Phase
Input Hz 50/60 Hz
Max Open Circuit Voltage 63 VDC
Metal Type Most Metals
Process MIG (GMAW) Flux Cored (FCAW) Stick (SMAW) DC-TIG (GTAW-DC)
Welding Mode CC/CV
Portability Handle(s)
Running Gear / Cart (Optional)
Weld Output CC,CV
Applications Welding Projects
Net Width 10.6 in
Net Height 13.4 in
Net Length 20.8 in
Net Weight 38.4 lbs
Warranty 3 Years
Hobart Warranty

Accessories

Hobart® Protective Cover for Handler® and Multi-Handler™ Welders

Vinyl laminated cover to protect the finish of your Handler® or Multi-Handler™ welder (all part numbers). This durable cover resists stains and mildew while handy pockets allow for storage of power cables, torch assemblies and work cables.

Hobart® Running Gear/Cylinder Rack

Accepts gas bottles up to 7 inches in diameter and 33 in. tall, maximum 75 lbs. Assembled dimensions: 18 inches high x 30 inches length x 12.5 inches wide. Welder shelf dimensions: 12.5 inches x 19.75 inches. Assembly required.
Hobart® SpoolRunner 100 Direct Plug-in Spool Gun

For use with Handler® 190, Handler® 210 MVP and Multi-Handler 200, helps eliminate feeding problems associated with soft aluminum wire.
HR100 4-Pin Mig Gun Replacement, 100-Amp, 10 Ft

Replacement MIG gun with brass nozzle for Handler 190, 210MVP and Multi-Handler 200 welders. Feeds .023" - .045" hard or flux cored wires. Rated duty cycle of 100% with CO2 shielding gas and 60% with mixed gases.

Consumables

.023 Contact Tip - (Pkg of 5) See Product for Details

.023 inch contact tips (5 pack) compatible for use with Handler 140, 187, 190, 210, 210MVP, TREK 180 and IronMan 230/240 and 250, Millermatics, and later Hobart Beta-MIG 1800 and 2510 welders.
.030 Contact Tip - (Pkg of 5) See Product for Details

Pack of 5 .030 inch contact tips compatible for use with Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100, IronMan 230/240 & later Hobart Beta-MIG 1800 and 2510 welders.
.035 Contact Tip - (Pkg of 5) See Product for Details

Pack of 5 .035 inch contact tips for use with the Hobart Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100 & IronMan 230/240 & later Hobart Beta-MIG 1800 and 2510 welders.
.045 Contact Tip - (Pkg of 5) See Product for Details

.045 contact tips (Pkg of 5) for your Hobart "H" series MIG gun. Contact tips also fit all Miller "M" series MIG guns. Suitable for Hobart Handler 175 & 187, Hobart Handler 210, Hobart IronMan 210, 230/240 & 250.

Resources

Videos

NEW Multi-Handler™ 200 Multiprocess Welder
The new Hobart Multi-Handler 200 is MIG, stick and DC TIG capable.
Setting Up Multi-Handler™ 200 Multiprocess Welder
Learn how to set up your new Hobart Multi-Handler 200 multiprocess welder so it’s ready for MIG, stick or DC TIG welding.
DIY Welding Project: Scrap Metal Motorcycle
Watch as Michael with VivonaArt walks through step-by-step instructions on how to create a scrap metal motorcycle with the...

Reviews & Ratings

Question & Answers

Products

Support

Company

© Hobart Welding Products