Handler® 210 MVP™ MIG Welder | HobartWelders

Handler® 210MVP MIG Welder

500553
Welds 24 gauge up to 3/8 in. (9.5 mm) thick steel. Amp range of 25 - 210A.
hobart generic gift box Make sure to buy from an authorized Hobart® retailer. FIND RETAILER

Features

What's Included

  • Comfortable 10 ft. (3m) HR-100 gun
  • Owner's manual with installation, operation and maintenance guidelines.
  • 10 ft.(3m) work cable with clamp
  • Built-in gas solenoid value and dual-gauge regulator with gas hose
  • Spool hub assembly accommodates 4 or 8 in. spools
  • Sample spool of .030 in. self-shielding flux-cored wire
  • .030 (0.8mm) contact tips
  • Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in.
  • Power cord with 5-15 P (115 V, 15 A) and 6-50 P (230 V, 50 A) MVP (TM) plugs
  • Welding guide and material thickness gauge
Max 210 amps in small portable case
Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel.
7 (230 V) and 4 (115V) voltage settings, with infinite wire feed speed control
Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up.
Accepts uncomplicated, simple-to-install direct plug-in SpoolRunner 100 spool gun
Allows you to weld aluminum with enhanced feed ability and reduction of “bird-nesting.
Integrated spool gun control circuitry is standard
Eliminates your need for an additional control box or adaptor to connect the SpoolRunner 100 spool gun.
Dual-voltage capability with MVP (multi-voltage plug)
Allows you to connect to common 115 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
Door Chart with initial settings
You are able to quickly reference initial settings for different wires, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional.
Built-in contactor
Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe.
Industrial cast aluminum wire drive system
Durable wire feed provides you professional performance
Convenient polarity changeover
Easier and quicker for you to change polarity between solid or tubular wire.
Quick Select drive roll
Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire.
Short circuit protection
Protects unit against current overload.
Self- resetting thermal overload protection
Protects power transformer from thermal overload to provide you maximum reliability.
Current-limited motor protection
Protects wire feed system from overload, you won’t need to change or reset the circuit breaker button.

Not Included

  • Shielding gas and safety equipment not included.

Specifications

Product Literature

Handler 210MVP 250822

Processes

Flux Cored (FCAW)
MIG (GMAW)

General Specifications

Title Handler® 210MVP MIG Welder
Industries Interests Racing
Farm and Ranch
Manufacturing
Material Thickness Mild Steel 24 ga. (0.5 mm) - 3/8 in. (9.5 mm)
Weldable Metals Aluminum
Stainless Steel
Steel
Input Voltage 110/115/120 V
220/230/240 V
Input Phase 1-Phase
Input Hz 60 Hz
Current Type DC
Rated Output 115 V, 90A @ 20%,230V, 150A @ 30%
Max Open Circuit Voltage 34 VDC
Wire Feed Speed 40 IPM - 770 IPM
Wire Diameter Stainless 0.024 in. - 0.035 in.
Stainless 0.6 mm. - 0.9 mm.
Solid Steel 0.6 mm. - 0.9 mm.
Solid Steel 0.024 in. - 0.035 in.
Flux Cored 0.03 in. - 0.045 in.
Flux Cored 0.8 mm. - 1.2 mm.
Portability Handle(s)
Weld Output CV
Applications Welding Projects
Net Width 10.625 in
Net Height 12.375 in
Net Length 19.5 in
Net Weight 79 lbs
Warranty 3 Years
Hobart Warranty

Accessories

Hobart® Running Gear/Cylinder Rack

Accepts gas bottles up to 7 inches in diameter and 33 in. tall, maximum 75 lbs. Assembled dimensions: 18 inches high x 30 inches length x 12.5 inches wide. Welder shelf dimensions: 12.5 inches x 19.75 inches. Assembly required.
Hobart® Protective Cover for Handler® and Multi-Handler™ Welders

Vinyl laminated cover to protect the finish of your Handler® or Multi-Handler™ welder (all part numbers). This durable cover resists stains and mildew while handy pockets allow for storage of power cables, torch assemblies and work cables.

Hobart® SpoolRunner 100 Direct Plug-in Spool Gun

For use with Handler® 190, Handler® 210 MVP and Multi-Handler 200, helps eliminate feeding problems associated with soft aluminum wire.
HR100 4-Pin Mig Gun Replacement, 100-Amp, 10 Ft

Replacement MIG gun with brass nozzle for Handler 190, 210MVP and Multi-Handler 200 welders. Feeds .023" - .045" hard or flux cored wires. Rated duty cycle of 100% with CO2 shielding gas and 60% with mixed gases.

Consumables

.023 Contact Tip - (Pkg of 5)

.023 inch contact tips (5 pack) compatible for use with Handler 140, 187, 190, 210, 210MVP, TREK 180 and IronMan 230/240 and 250, Millermatics, and later Hobart Beta-MIG 1800 and 2510 welders.
.030 Contact Tip - (Pkg of 5)

Pack of 5 .030 inch contact tips compatible for use with Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100, IronMan 230/240 & later Hobart Beta-MIG 1800 and 2510 welders.
.035 Contact Tip - (Pkg of 5)

Pack of 5 .035 inch contact tips for use with the Hobart Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100 & IronMan 230/240 & later Hobart Beta-MIG 1800 and 2510 welders.
.045 Contact Tip - (Pkg of 5)

.045 contact tips (Pkg of 5) for your Hobart "H" series MIG gun. Contact tips also fit all Miller "M" series MIG guns. Suitable for Hobart Handler 175 & 187, Hobart Handler 210, Hobart IronMan 210, 230/240 & 250.

Resources

Videos

Weld at 230V or 115V With the Hobart Handler 210MVP
With the Hobart® Handler® 210MVP, you can operate off 230V or 115V power, fine-tune your parameters and easily switch wire...
Quick Select Drive Roll
Quick Select™ drive roll saves time on set up by offering three grooves in one – two for different size solid wire...
DIY Welding Project: Welcome Sign
Watch as Olivia with Hobart Welding Products walks through step-by-step instructions on how to create a welcome sign using...

Reviews & Ratings

Question & Answers

Products

Support

Company

© Hobart Welding Products