Handler® 125 MIG Welder | HobartWelders

Handler® 125 MIG Welder

500573
Welds 24 gauge up to 3/16 in. (4.8 mm) thick steel. Amp range of 25-130A.
hobart generic gift box Make sure to buy from an authorized Hobart® retailer. FIND RETAILER

Features

What's Included

  • Comfortable 8 ft. (2.4 m) H100F2-8 gun with liner for .030-.035 in. (0.8 -0.9 mm) diameter wire.
  • Work cable with clamp
  • (2) - 0.030 (0.8 mm) contact tips
  • Power cord with molded plug
  • Weld set -up chart
  • Owner’s manual with installation, operation and maintenance guidelines.
Four output voltage settings
Four voltage ranges allow you to adjust the arc for different thicknesses.
Factory-installed gas solenoid
Easy for you to change from flux-cored wire to MIG welding.
Built-in contactor
Keeps wire electrically "cold" until trigger is pulled which gives you ease of use.
Durable feed head with quick-release drive roll tension lever
Positive feed with adjustable tension gives you easy access to thread new wire.
Spool hub assembly accommodates 4- or 8- inch spools
Offers you flexibility to use small or large spools of wire to better suit your welding needs.
Self- resetting thermal overload protection
Protects power transformer from thermal overload to provide you maximum reliability.
Broad output range of 25 – 130 Amps.
Allows you to weld up to 1/8 in. steel with flux-cored wire.

Specifications

Product Literature

Handler 125 284611

Processes

Flux Cored (FCAW)
MIG (GMAW)

General Specifications

Title Handler® 125 MIG Welder
Industries Interests DIY / Home Hobbyist
Farm and Ranch
Maintenance and Repair - Field Operations
Material Thickness Mild Steel 24 ga (0.8 mm) - 3/16 in
Weldable Metals Stainless Steel
Steel
Input Voltage 110/115/120 V
Input Phase 1-Phase
Current Type DC
Rated Output 80 A @ 25%
Max Open Circuit Voltage 28 VDC
Wire Feed Speed IPM Range 88 IPM - 545 IPM
Weld Output CV
Net Width 10 in
Net Height 13.5 in
Net Length 19.4 in
Net Weight 57.5 lbs
Warranty 3 Years
Hobart Warranty

Accessories

Hobart® Small Running Gear/Cylinder Rack

Small welding cart is designed to hold most portable welders. Accepts gas bottles up to 7 inches in diameter, maximum 75 lbs. Assembled dimensions: 18 inches high x 30 inches length x 12.5 inches wide. Welder shelf dimensions: 12.5 inches x 19.75 inches. Assembly required.
Hobart® Protective Cover for Handler

For use with Handler machines, weatherproof nylon. Fits Handler machines 140/190/210 MVP and Multi-Handler 200.
270629 H100F2-8 Replacement Flux-Cored Gun
H100F2 MIG Flux Cored Gun .030-.035 Replacement, 8 Ft

Replacement MIG Flux Cored gun for Hobart Handler 100 and Auto Arc 100 welders with 8' cable. For welding wire diameter .030-.035".
Reinforced 5 ft. Gas Hose

Reinforced 5 ft. gas hose compatible with Hobart Handler 125

Consumables

.030 Contact Tip - (Pkg of 5) $7.99

Pack of 5 .030 inch contact tips compatible for use with Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100, IronMan 230 & later Hobart Beta-MIG 1800 and 2510 welders.
.035 Contact Tip - (Pkg of 5) $7.99

Pack of 5 .035 inch contact tips for use with the Hobart Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100 & IronMan 230 & later Hobart Beta-MIG 1800 and 2510 welders.
Contact Tip Adapter $11.99

This contact tip adapter is made to fit your Hobart H series MIG gun.

Flux-Cored Nozzle $5.99

This Flux-Cored Nozzle is 1/2" in size and fits Hobart Handler® models 125, 140, 187, 190, 210, 210MVP and Trek 180 welding guns.

Resources

Videos

How to Choose the Best Shielding Gas for MIG Welding
Learn the shielding gases differences between C100 (100% carbon dioxide ) and C25 (100% carbon dioxide / 25% argon) and...
How to Change a MIG Gun Liner
Watch these simple steps on how to change a MIG gun liner.
How to Troubleshoot a Bad MIG Weld
Learn how to troubleshoot MIG welding problems by checking the contact tips, work clamp, drive roll and spool hub tension,...

Reviews & Ratings

Question & Answers

Products

Support

Company

© Hobart Welding Products