Hobart Welders
Home » Weld Talk
Weld Talk Message Boards - Powered by vBulletin

Results 1 to 15 of 166

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2007
    Location
    raleigh, nc
    Posts
    446

    pipe burner build instructions

    (pic#1 and 2) 1" untested pipe. U can use black pipe but it's thinner and does not stand up to the heat and will rust and flake. Thread and cap end.

    (pic#3 and 4) gas mixer is a 1" cap about $1.50. Drill (4) 1/4 inch holes on face of the cap and drill and tap the center for a 1/8 inch npt thread

    Purchase a high pressure regulator. Heres one from amazon

    http://www.amazon.com/gp/search/ref=...ET6CHU3M5KOGTP

    PRESSURE REGULATOR 360#189 ADJ. W/EXFLOW POLY 36" HIGH PRESSURE HOSE
    part #32832

    In Stock



    pic of hose end hpim0063.jpg
    Last edited by boykjo; 02-17-2010 at 12:00 PM. Reason: added pic. end of regulator hose and part #

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •