IronMan® 230 MIG Welder | HobartWelders

IronMan™ 230 MIG Welder

Welds up to 1/2", operates on 230V input voltage and up to 230A output power, outperforms the competition on arc quality, voltage control, and value.

Machine Only

Spool Gun Package


What's Included

  • 15 ft. 200-amp MIG Welding gun
  • Weld, set-up and parts information chart
  • Regulator/flow gauge
  • 5 ft. gas hose
  • Primary input cable with plug
  • Dual-groove drive roll - .030/.035 in.
  • 10 ft. work cable with clamp
  • Dual side-mounted cable hangers
  • .030 and .035 contact tips
  • Built-in running gear/cylinder rack
Sloped front panel
Makes controls easy to see and access.
Arc Performance
Excellent short arc performance with easy to control weld puddle.
175 amps @ 60% duty cycle, and wide amperage range
High machine-output duty cycle, increasing productivity with longer welding periods. Versatile for MIG and flux-cored, gas or gasless welding applications. Can weld at higher amps at lower duty cycle.
12-position voltage control
Simplified and accurate adjustments. Maximizes amount of control. Allows for smooth arc with high operator appeal.
Spool gun ready
Easy setup for welding aluminum with no additional interface.
Reversible drive rolls: two grooves for two wire sizes on one drive roll
50% less stocking of drive rolls. Standard, one-piece drive roll decreases spare parts and changeover time, reducing overall costs.
Hinged feeder panel
For greater accessibility to wire feeder panel for spool and feed roll changes, increasing productivity and operator appeal.
Infinite wire feed control
Allows for precise adjustment of penetration and weld bead shape.
Dual side-mounted cable hangers
Convenient storage for cables when not in use.
Cooling system operates only when needed reducing power consumption and containments drawn into the machine.
Comes complete with factory installed features
Ready to set up and weld: comes complete with wire feeder, running gear, cylinder rack, regulator/flow gauge, MIG gun, cable and clamp, extra tips.

Not Included

  • Shielding gas
  • Safety Equipment


Product Literature


Flux Cored (FCAW)

General Specifications

Title IronMan™ 230 MIG Welder
Material Thickness Mild Steel 24 GA. (0.8 mm) - 1/2 in.
Weldable Metals Aluminum
Stainless Steel
Input Voltage 220/230/240 V
Input Phase 1-Phase
Current Type DC
Rated Output 60% @ 175A
Max Open Circuit Voltage 38 VDC
Amperage Range 30 A - 250 A
Wire Feed Speed 0 IPM - 700 IPM
Weld Output CV
Net Width 18.625 in
Net Height 31.5 in
Net Length 36.5 in
Net Weight 185 lbs
Warranty 3 Years




Reviews & Ratings