Handler® 140 MIG Welder | HobartWelders

Handler® 140 MIG Welder

500559
Welds 24 gauge up to 1/4 in. (6.4 mm) thick steel. MIG Ready. Amp range of 25 - 140A.
Spec Sheet (English)
hobart generic gift box Make sure to buy from an authorized Hobart® retailer. FIND RETAILER

Features

What's Included

  • Comfortable 10 ft. (3 m) HR-100 gun
  • Owner's manual with installation, operation and maintenance guidelines.
  • 10 ft. (3 m) work cable with clamp
  • Built-in gas solenoid valve and dual-gauge regulator with gas hose
  • Spool hub assembly accommodates 4 or 8 in. spools
  • Sample spool of .030 in. (0.8mm) self-shielding flux-cored wire
  • .030 in. (0.8mm) contact tips
  • Quick Select™ drive roll for .024 in. (0.6mm) or .030/.035 in. (08/.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
  • Power cord with plug
  • Welding guide and material thickness gauge
Self-resetting motor protection
Protects wire feed system from overload, you won't need to change or reset the circuit breaker.
Arc Performance
Smooth, stable arc on all thicknesses allows you the best arc possible.
Industrial cast aluminum wire drive system
Durable wire feed provides you professional performance.
Five-position voltage control
Five voltage ranges allow you to fine-tune the arc.
Quick Select drive roll
Less of your time consumed in setup by offering three grooves - two for different size solid wire and a third for flux-cored wire.
Weighs only 57 pounds
Easier to transport: increased ability to weld where you need to weld.
Convenient polarity changeover
Easier and quicker for you to change polarity between solid or tubular wire.
Sloped control panel
Increased visibility so you can make adjustments more easily.
Self- resetting thermal overload protection
Protects power transformer from thermal overload to provide you maximum reliability.

Not Included

  • Shielding gas and safety equipment not included.

Specifications

Product Literature

Handler 140 217919

Processes

Flux Cored (FCAW)
MIG (GMAW)

General Specifications

Title Handler® 140 MIG Welder
Industries Interests Farm and Ranch
Auto Repair
Amperage 25 A - 140 A
Material Thickness Mild Steel 24 ga. (0.5 mm) - 1/4 in. (6.4 mm)
Weldable Metals Aluminum
Stainless Steel
Steel
Input Voltage 110/115/120 V
Input Phase 1-Phase
Input Hz 60 Hz
Current Type DC
Rated Output 90 A @ 20% duty cycle
Max Open Circuit Voltage 28 VDC
Wire Feed Speed 40 IPM - 700 IPM
Wire Diameter Stainless 0.024 in. - 0.035 in.
Stainless 0.6 mm. - 0.9 mm.
Solid Steel 0.6 mm. - 0.9 mm.
Solid Steel 0.024 in. - 0.035 in.
Flux Cored 0.03 in. - 0.035 in.
Flux Cored 0.8 mm. - 0.9 mm.
Portability Handle(s)
Weld Output CV
Applications Welding Projects
Net Width 10.625 in
Net Height 12.375 in
Net Length 19.5 in
Net Weight 57 lbs
Warranty 3 Years
Hobart Warranty

Accessories

Hobart® Running Gear/Cylinder Rack

Accepts gas bottles up to 7 inches in diameter and 33 in. tall, maximum 75 lbs. Assembled dimensions: 18 inches high x 30 inches length x 12.5 inches wide. Welder shelf dimensions: 12.5 inches x 19.75 inches. Assembly required.
Hobart® Protective Cover for Handler® and Multi-Handler™ Welders

Vinyl laminated cover to protect the finish of your Handler® or Multi-Handler™ welder (all part numbers). This durable cover resists stains and mildew while handy pockets allow for storage of power cables, torch assemblies and work cables.

HR100 2-Spade MIG Gun Replacement, 100-amp, 10 Ft

Replacement 10 ft. HR100 MIG gun for your Hobart Handler 135, 140, 175, 180 or 187 MIG welder. Comes ready to feed .030-.035 diameter welding wire. Suitable for use with all Hobart MIG welders that have a 2 spade trigger connection.

Consumables

.023 Contact Tip - (Pkg of 5)

.023 inch contact tips (5 pack) compatible for use with Handler 140, 187, 190, 210, 210MVP, TREK 180 and IronMan 230/240 and 250, Millermatics, and later Hobart Beta-MIG 1800 and 2510 welders.
.030 Contact Tip - (Pkg of 5)

Pack of 5 .030 inch contact tips compatible for use with Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100, IronMan 230/240 & later Hobart Beta-MIG 1800 and 2510 welders.
.035 Contact Tip - (Pkg of 5)

Pack of 5 .035 inch contact tips for use with the Hobart Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100 & IronMan 230/240 & later Hobart Beta-MIG 1800 and 2510 welders.
Slip Type MIG Nozzle, 1/2"

This 1/2" slip type MIG nozzle fits most Hobart Handler® models and Auto Arc 130 models.

Resources

Videos

Hobart Handler® 140 Product Reviews
If you’re looking for the best affordable MIG welder, the Handler® 140 is the industry’s top value and the most popular...
Quick Select Drive Roll
Quick Select™ drive roll saves time on set up by offering three grooves in one – two for different size solid wire...
DIY Welding Project: MIG Welding a Keg Grill
Watch as Steve Christena from The Arc Academy walks through step-by-step instructions on how to create a keg grill using...

Reviews & Ratings

Question & Answers

Products

Support

Company

© Hobart Welding Products