Handler® 100 Flux-Cored Welder | HobartWelders

Handler® 100 Flux-Cored Welder

500572
Welds 18 gauge up to 3/16 in. (4.8 mm) thick steel. Amp range of 30 - 100A.

Features

What's Included

  • Comfortable 8 ft. (2.4 m) H100F2-8 gun with liner for .030 - .035 in. (0.8-0.9 mm) diameter wire
  • Work cable with clamp
  • .030 in. (0.8 mm) contact tips
  • Power cord with plug
  • Weld set-up chart
  • Owner's manual with parts list, installation, operation and maintenance guidelines.
Broad output range of 30 -100A
Allows you to weld up to 3/16 in. (4.8 mm) steel with flux-cored wire.
Four output voltage settings
Four voltage ranges allow you to adjust the arc for different thicknesses.
Spool hub assembly accommodates 4- or 8-inch spools
Offers you flexibility to use small or large spools of wire to better suit your welding needs.
Built-in contactor
Keeps wire electrically "cold" until trigger is pulled which gives you ease of use.
Durable feed head with quick-release drive roll tension lever
Positive feed with adjustable tension gives you easy access to thread new wire.
Short circuit protection
Protects unit against current overload.
Self-resetting thermal overload
Protects power transformer from thermal overload to provide you maximum reliability.

Specifications

Processes

Flux Cored (FCAW)

General Specifications

Title Handler® 100 Flux-Cored Welder
Material Thickness Mild Steel 18 ga (0.8 mm) - 3/16 in
Weldable Metals Steel
Input Voltage 110/115/120 V
Input Phase 1-Phase
Current Type DC
Rated Output 80A @ 20% Duty Cycle
Max Open Circuit Voltage 40 VDC
Wire Feed Speed 90 IPM 320 IPM
Weld Output CV
Net Width 10 in
Net Height 13.5 in
Net Length 16 in
Net Weight 44 lbs
Warranty 3 Years

Resources

Videos

Reviews & Ratings

Question & Answers