Palco 750 Electrodes

[Ed in Ga]

Just curious as a box of 3/32 were given to me. Between the box and printing on the rods: replaces all low hydrogen, all position, for low alloy steel, tensile strength 118,000 psi and if I'm reading the box right AC, -DC . If neg DC would these be ER11812? I have little knowledge of stick welding but thought I'd try them if they were not a rod that should have been stored in an oven. No importance to the weld, just to try my inverter on some steel scrap when time allows.
Thanks,
Ed

[Rocky D]

They use that rod for bridge work, and high strength weldments. I runs pretty good as I recall.