What The ..... do I have here ?

[vicegrip]

I have a real heavy duty look'n OTC feeder and
This Jetline ......... I had a brainfart
I'd just finally throw one on my 330 AP/B
( yes we've been thru all the CC/CV thing)
but I used a set-up like that along time ago, and was clueless and still did OK.
===================
SO I thought I'd check EBAY for some drivewheels for the JETLINE
& I find a dirty look'n one with a decent offer on it, and a nice one with a WoW pri$e.

Says it's a seemfeeder??
Mine's never been used and runs fine.

SO it ain't for a mig setup with a hand/held true?

EdJucate me please.

Mine looks like this>>>
http://www.ebay.com/itm/JETLINE-9029...item56486250f0
===================
But is pretty like this
http://www.ebay.com/itm/NEW-JETLINE-...item231cf88ed1

[aametalmaster]

Its off of a Jetline seam welder which can be TIG or MIG or both. We had rows of them in the sink factory to weld the double bowl sinks together. Look at a SS double bowl kitchen sink sometime and you will see a seam right up the middle. Notice the aluminum drive setup is just like one on an older Miller mig welder thats becase Jetline and Miller are ITW companies. So its just a drive for a mig that prob used a straight gun instead of one with a curved end...Bob
http://www.jetline.com/products.aspx?c=37

[vicegrip]

Thanks Bob.
Explains why there's nowhere to pug a trigger wire into it!
I think maybe the OTC might serve my Idea better.....
got to come with variable DC for that one though.

Maybe try to just sell the Jetline on the Interwebs.

vg

[vicegrip]

The OTC feeder has a Tweeco stinger reciever on it.
I forgot that I have a serious Tweeco 15 stinger, I got in a deal with Bkahler years back.
I need to know how much of one of these takes replacement parts besides the liner.

The tip is plugged or corroded but it seems ok otherwise.
Can't be sure what all is missing on the end.

I have to admit that in the two employments where I did quite a bit of mig-welding,
I didn't pay much attention to the equipment as long as it was working.

I have a power source to drive the feeder as well..........
No idea what pins go where in the amphenol conector.
vg