Can you help me id this torch setup?

[Splatterboy]

Locally avail for $350 including a 3/4 full oxy bottle (about an 80 I'm guessing - it's about 32" tall, 7" dia). Victor torch with rosebud, cutting head and welding nozzle, guages and hose. Here are the numbers I wrote down:

CSRM360A
CSRM350D

ca1350
e44f4-1
2-w-1
100FL

Picture attached

Thanks
[img]34216[/img]

[usmcpop]

Those are SR350 series medium duty Victor regulators. The CA1350 is a medium duty cutting attachment that fits the 100 series handles. I have a 100FC handle with the built-in flash arrestor/check valves. Not sure of the e44f4-1.

About 2 years ago, the Super-Range II set with a rosebud was $275. The current Performer set with the newer EDGE regulators is available on the web for $220.- $230. delivered. A new 80 CF tank is about $190. Bargain a little. (I saw a nice Journeyman torch with handle locally for $40.)

[Splatterboy]

Those are SR350 series medium duty Victor regulators. The CA1350 is a medium duty cutting attachment that fits the 100 series handles. I have a 100FC handle with the built-in flash arrestor/check valves. Not sure of the e44f4-1.

About 2 years ago, the Super-Range II set with a rosebud was $275. The current Performer set with the newer EDGE regulators is available on the web for $220.- $230. delivered. A new 80 CF tank is about $190. Bargain a little. (I saw a nice Journeyman torch with handle locally for $40.)

Thanks for the help.

[monckywrench]

I'd rather have the old-style regs since the Edge regs don't have full aftermarket parts support and the classic regs are ALL BRASS.

No need to mention that when bargaining!