Hobart Welders
Home » Weld Talk
Weld Talk Message Boards - Powered by vBulletin

Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2002
    Location
    NYS
    Posts
    72

    Resolution Camera

    What resolution do you guys use on your camera to upload pictures??

  2. #2
    Join Date
    Sep 2002
    Location
    Aumsville, Oregon
    Posts
    5,202

    Re: Resolution Camera

    Originally posted by TheOldOne
    What resolution do you guys use on your camera to upload pictures??
    My camera is set at 1600X1200. It makes the size of the picture be about 500KB. So what I do then is reduce the size of the picture with my computer software down to about 95 KB.

  3. #3
    Join Date
    Sep 2002
    Location
    San Diego, CA
    Posts
    7,704

    Re: Resolution Camera

    Originally posted by TheOldOne
    What resolution do you guys use on your camera to upload pictures??
    My camera is a Sony Mavica FD 88 It puts the pics o a 3.5" floppy disk. The resoultion is set at 640 x 480, this gives me a pic of around 100k, then my software can optimise them to be half that size with no loss in quality! I use ACDSee4.0
    Arcin' and sparkin', Rocky D <><
    Experience is something you don't get until just after you need it.
    IF YOU CAN READ THIS, THANK A TEACHER...
    IF YOU'RE READING THIS IN ENGLISH, THANK A SOLDIER!

  4. #4
    Join Date
    Sep 2002
    Location
    NYS
    Posts
    72

    Re: Re: Resolution Camera

    Originally posted by Rocky D


    My camera is a Sony Mavica FD 88 It puts the pics o a 3.5" floppy disk. The resoultion is set at 640 x 480, this gives me a pic of around 100k, then my software can optimise them to be half that size with no loss in quality! I use ACDSee4.0
    Hi Rocky D; My camera is also a Sony FD95 & uses a floppy. They are a little on the big side but I still like it. Like most of this stuff it takes going to school for a few years to learn how to operate it.
    Will use the 640X480 setting and see how I make out.
    Thanks
    Last edited by TheOldOne; 10-03-2002 at 06:09 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •