The price of romex is thru the ceiling! $77 for 12/2. Im finding it on Ebay for $30. Time to shop.
Where to Buy
Service & Support
e-Learning
Weld Talk
The price of romex is thru the ceiling! $77 for 12/2. Im finding it on Ebay for $30. Time to shop.
______________________________________
Bakery Mechanic
Licensed Electrician
check out: www.mattesbydesign.com great for vinyl lettering
"Why do i ask such difficult questions? 'Cause i know the answers to the easy one's!"
*****Heineken*****
-any questions or discussions on 'gout' are welcome-
This kind of news always hits when I am out of stock on the item whose price is going sky high. Thanks a lot.![]()
Figures, I just ran out of 14/2 and 12/3. That's okay, I charge by the hour plus materials, so except for my many pro bono jobs, the price doesn't bother me too much. A lot of my pro bono work can be done with leftovers, but not always!
I think around here it is still in the $40 something range. I think we just pried some 12/2 mc and it was still going for around 80 or 90. I'll have to buy it all up before it does that around here. I think insulated wire at the scrapyard is going for 1.10 and bare bright is going for like 1.70. I wish I held onto everything I have sold in the past.
Hobart Champion 10,000
Montgomery Ward 230A stick
cheesy Century flux core wire feed
I found out after running out of 12/2 also.![]()
______________________________________
Bakery Mechanic
Licensed Electrician
check out: www.mattesbydesign.com great for vinyl lettering
"Why do i ask such difficult questions? 'Cause i know the answers to the easy one's!"
*****Heineken*****
-any questions or discussions on 'gout' are welcome-
i get it from my local cooper electrical supplyOriginally Posted by TOMWELDS
arch electrial is good too, just toss my old wagner shirt on and get good discounts![]()
much better than the $77 lowes/home depot prices
$77 WAS at Cooper....
2.0? Is this the new version Moody??...LOL
______________________________________
Bakery Mechanic
Licensed Electrician
check out: www.mattesbydesign.com great for vinyl lettering
"Why do i ask such difficult questions? 'Cause i know the answers to the easy one's!"
*****Heineken*****
-any questions or discussions on 'gout' are welcome-
Let's hope this version addresses the bugs in the last oneOriginally Posted by TOMWELDS
![]()
Trailblazer 302 * Millermatic 212 * Syncrowave 180SD * X-Treme 12VS Feeder * Spoolmate 3035
Thermal Dynamics Cutmaster 52 Plasma * Lincoln 175 MIG
Victor Superrange II * Victor Journeyman
Hobart HH 125EZ
hahaha...![]()
That would have to be one **** of a patch ! Not sure the programmers could do it all in one patch. I would look for 3.0 in the near future.Originally Posted by Zrexxer
![]()
![]()
![]()
OMS
HH175
Red Tomstone W/ HF for TIG
Old Miller Engine Driven 225 Amp AC Stick Welder
Smith O/A X 2
Harris O/A
BridgePort
MSC cut off BandSaw 6X12"
And more!
Shop Mechanic for Brinks Coin
When I wired the new house I bought it through work from one of our electrical suppliers. Home Depot wanted $228.00/M.Crescent Electrical Supply was only $136.00! There is quite a margin on the consumer side.![]()