PDA

View Full Version : Hobart GC-350 Generator/Welder not working



hadley_001
11-23-2009, 11:15 PM
hi, I'm trying to fix this old welder.

It welds fine except you have to hold the main contactor in manually otherwise it wont weld.

If anybody has any info on how it works or how to fix it, or a wiring diagram, that would be great.

Thanks
Hadley.

Hobart Expert Keith
11-24-2009, 12:43 PM
This welder is designed primarily for wire (GC-350). If you are stick welding you are using the wrong process for this machine. To get the output to activate place a jumper plug into the 5 pin remote and short pin "A" to pin "B".

Keith

hadley_001
11-26-2009, 10:37 PM
Thanks Keith.
Works well now.