hypertherm repair power max 600

[toolaholic]

I've lost My Patience with this redi lite problem. Air in is 120 psi , changed out all consumable head parts, installed new internal air filter.
Can I ship this back to H THERM N. H. for repair? :mad:

[trial&error]

are any of the other lights lit? mine is only set for 80 psi (small compressor). any other symptoms?

[toolaholic]

Which model do You have,please? Yes top lite. Your suppose to have 120 psi coming in,I have 125psi

[toolaholic]

Which model do You have,please? Yes top lite. Your suppose to have 120 psi Min. coming in,I have 125psi

[Wyoming]

I doubt it will help if you've re-installed new consumables, but go back in and check to be absolutely sure they are in the proper order, or a mix and match of electrodes, cups, etc. The Power Max 900 I have is a darned finicky machine about the proper order of those consumable parts...and they do mix and match too easily as well as get out of being installed in the proper order. I've sat down puzzling it through for 15-20 minutes at a time before smackin' myself on the head after finding one nitpicking part out of synx.

[toolaholic]

Just dropped it off at a very impressive shop ,We'll see:cool:

[jimcolt]

Have you spoken directly with the tech service group at Hypertherm? It does not sound like an air pressure related problem to me....could be the torch parts in place sensor microswitch. The tech service staff handles calls like this every day....I am quite sure they will steer you in the right direction for the correct fix. Here is contact info:

Technical Service
technical.service@hypertherm.com
800-643-9878 Tel - Toll Free in USA
and Canada

Best regards, Jim Colt

[toolaholic]

Sarah found a local repair facility for Me. Redi-Arc in Berkley Ca.
HUGE facility,nice folks. $50.00 to look at it. I'll report My findings.
Thanks Tool

[toolaholic]

Pressure regulator. Under warantee. Wouldn't take the $ 50.00 or a nickle