Yeah another tank....

[B_C]

Water tank for my buddy's toy hauler to hold wash the bikes water.....

http://im1.shutterfly.com/media/47b8cc33b3127ccec58d17fe49d400000040O00AcNGjdq4ct2 IPbz4Q/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/

http://im1.shutterfly.com/media/47b8cc33b3127ccec58d29d6c8d300000040O00AcNGjdq4ct2 IPbz4Q/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/

http://im1.shutterfly.com/media/47b8cc33b3127ccec58c5d4ce83f00000040O00AcNGjdq4ct2 IPbz4Q/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/

http://im1.shutterfly.com/media/47b8cc33b3127ccec58dc77dc80f00000040O00AcNGjdq4ct2 IPbz4Q/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/

[Don52]

I enjoy looking at your nice aluminum welds. Please keep posting them. It is great motivation for me to keep working on my aluminum welding skills.

[Rocky D]

Beautiful! How do you DO that??? No warpage, either, don't look like you back-stepped,either...which is what I would not have done, either. :D What's the mat'l thickness?

[B_C]

It's 1/8" and I tack the heck out of it before welding complete.....What do you mean BACK STEP?

Thanks Rock, Merry Christmas

http://smg.photobucket.com/albums/v93/billcalicura/th_Photo11.jpg

[awill4x4]

I've always enjoyed B_C's pics of his fuel tanks as it's something I also get involved with at work here in Oz.
Here's some pics of one I'm in the middle of doing and it should be finished just after the New Year break. (apologies B_C if you feel I'm hijacking your thread)
There's still a fair bit of work to do with extra baffling and a drop down sump to accommodate a pair of electric fuel pumps and pickups.
Like B_C, I also prefer to use 3mm (approx .120") sheet (5005) if I can, especially on some of the larger tanks.
From a personal view I like to have folded baffles and endplates and I make the endplates so they sit proud about 5mm (3/16") past the shell and this gives me a natural lap/corner weld. I also do the same with the lid and make it 5mm smaller than the tank all around for the same reason.
It also allows to me to tack weld the flanges of the endplates on the inside of the tank to increase strength.
You do however see where the tacking is done on the outside of the shell but if you keep the tacks pretty even it doesn't look too bad.
Regards Andrew from Oz.

http://img.photobucket.com/albums/v328/awill4x4/Work%20related/Fuel%20tanks/SuperchargedHoldenutetank3.jpg

http://img.photobucket.com/albums/v328/awill4x4/Work%20related/Fuel%20tanks/SuperchargedHoldenutetank2.jpg

http://img.photobucket.com/albums/v328/awill4x4/Work%20related/Fuel%20tanks/SuperchargedHoldenutetank4.jpg

[chenry]

using a pulser on those welds ? or are you just that dam good ( envious )

[B_C]

I've always enjoyed B_C's pics of his fuel tanks as it's something I also get involved with at work here in Oz.
Here's some pics of one I'm in the middle of doing and it should be finished just after the New Year break. (apologies B_C if you feel I'm hijacking your thread)
There's still a fair bit of work to do with extra baffling and a drop down sump to accommodate a pair of electric fuel pumps and pickups.
Like B_C, I also prefer to use 3mm (approx .120") sheet (5005) if I can, especially on some of the larger tanks.
From a personal view I like to have folded baffles and endplates and I make the endplates so they sit proud about 5mm (3/16") past the shell and this gives me a natural lap/corner weld. I also do the same with the lid and make it 5mm smaller than the tank all around for the same reason.
It also allows to me to tack weld the flanges of the endplates on the inside of the tank to increase strength.
You do however see where the tacking is done on the outside of the shell but if you keep the tacks pretty even it doesn't look too bad.
Regards Andrew from Oz.

http://img.photobucket.com/albums/v328/awill4x4/Work%20related/Fuel%20tanks/SuperchargedHoldenutetank3.jpg

http://img.photobucket.com/albums/v328/awill4x4/Work%20related/Fuel%20tanks/SuperchargedHoldenutetank2.jpg

http://img.photobucket.com/albums/v328/awill4x4/Work%20related/Fuel%20tanks/SuperchargedHoldenutetank4.jpg

Hey no hard feeling here...I like seeing other projects so "Bring em On" Love that Table.....

And Merry Christmas

[Brianstick]

I enjoy looking at your nice aluminum welds. Please keep posting them. It is great motivation for me to keep working on my aluminum welding skills.

I wish I could weld aluminum like that also. The truth is, there just isn't enough broken aluminum things around here to weld, and I don't weld for a living. I took welding at night school years ago and we welded aluminum but we didn't spend enough hours on it to be able to do anything like that. A guy told me one time that aluminum is tricky, and I found out he was right. I tried welding an aluminum bracket one time for a golf cart and it came out like absolute sh*t! I was embarrassed to give it back to him. Several days later I talked to a "real weldor" and asked him why I had problems with it collapsing. He said I needed to use more heat and have a faster travel speed. Now when I weld aluminum I spend about 30 minutes practicing on scrap before I weld my good piece. Then when I finally do get good results, I take notes of my settings on the machine and how I did it, because it might be 6 months or more before I do it again. So yeah, welds like that are a big deal to some of us hobby weldors.

[B_C]

http://im1.shutterfly.com/media/47b9df28b3127ccec646a64feb1500000040O00AcNGjdq4ct2 IPbz4Q/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/

[jesus_man]

Wow, have you done any fuel cells? Looks really good!

J.D.