PDA

View Full Version : Some kind of brackets?


B_C
07-10-2008, 03:09 PM
http://im1.shutterfly.com/media/47b8d931b3127ccec4c00e25f01900000040O00AcNGjdq4ct2 IPbz4Q/cC/f%3D0/ps%3D50/r%3D0/rx%3D480/ry%3D320/

http://im1.shutterfly.com/media/47b8d931b3127ccec4c0583d711a00000040O00AcNGjdq4ct2 IPbz4Q/cC/f%3D0/ps%3D50/r%3D0/rx%3D480/ry%3D320/

http://im1.shutterfly.com/media/47b8d931b3127ccec4c06c58f05500000040O00AcNGjdq4ct2 IPbz4Q/cC/f%3D0/ps%3D50/r%3D0/rx%3D480/ry%3D320/

http://im1.shutterfly.com/media/47b8d931b3127ccec4c12187114800000040O00AcNGjdq4ct2 IPbz4Q/cC/f%3D0/ps%3D50/r%3D0/rx%3D480/ry%3D320/

I did these this morning before it got hot out.....A little undercut but they will be fine...
70S2 .032 filler with 1/6 tungsten (red) and gas lens...
Rocky D
07-10-2008, 09:52 PM
Did ya hafta drill and bend the parts, also? Looks pretty...I counted 54 (?) a 125EZ would have done that job in half the time. :D
B_C
07-10-2008, 11:10 PM
That's a good eye Rock...Yeah 54. What's a 125EZ?
Rocky D
07-11-2008, 01:54 AM
That's a good eye Rock...Yeah 54. What's a 125EZ?

It's one of the slickest little 125 amp fluxcore welders, made by Hobart, ya ever saw...one knob for
WFS and voltage...designed for the entry level dude, It's smooth arc, and ease of handling makes it number one in my shop... runs on 120v so you can take it anywhere there's power to run it. Do a search on here and you'll find lots of info on it. Great on galvanized stuff.
B_C
07-12-2008, 10:01 AM
Maybe half the time but not the cosmetic quality of tig. And these brackets are going to be plated..I am thinking of getting one of those "suitcase welders" for doing stainless repairs in kitchens
in food stores....Which one would you recommend?
Rocky D
07-12-2008, 10:13 AM
Maybe half the time but not the cosmetic quality of tig. And these brackets are going to be plated..I am thinking of getting one of those "suitcase welders" for doing stainless repairs in kitchens
in food stores....Which one would you recommend?

For that type of work, I don't think MIG or fluxcore would be the best process, due to sparks and clean up...I'd stick with TIG.