Need to translate

[sparky567]

Hey there to everyone out there. I've posted a few of times, and received good advice and/or recommendations every time. Before becoming a very junior member, I was lurked for some time. I then went out and got myself a little red box (Lincoln Electric Pro MIG 140) last spring based on my budget. I learned to do some welding on my own (nothing to write home about). Now I am enrolled in a bona fide welding program at the local community college in Portland, Oregon.
My problem is to try to adjust my machine to the machine they have at the college, for some self imposed homework/practice.
The college has these huge Miller multipurpose machines that can do TIG, Stick and MIG, I’m sure some of you guys have seen these!
Is there someone out there that can translate letters and numbers of my Lincoln to the Miller voltage and IPM. According to my owners manual the maximum voltage is 19 volts.
Output Range 30-140A DC
Wire Feed Speed Range (IPM) 50-300
Rate Output : 90amps 19 volts
Maximum open circuit voltage 29 volts.
My machine has letters from A to C voltage and numbers from 1 to 10 for wire speed.
Can anybody translate?

Thanks.