HH135, want to hook up gas?

[Aggie007]

What do I need to hook up gas to my HH135? I would like to make intercooler piping out of stainless tubing.

[Clay Walters]

Aggie007,

Your machine should have come with a regulator and gas hose. As long as its an Argon mix of some sort all you should need is a bottle of gas that accepts your regulator. Your manual will show the most common gas mixes for the most common applications for your machine. Just look for the chart with the metal thicknesses and recommended starting settings.

Clay

[Aggie007]

I bought it used so it didn't come with a regulator and a gas hose. Is there a kit that includes both?

[TexHand]

Aggie, it helps us help you if you put your location in your profile.

Check out this - forth from the bottom:

http://www.hobartwelders.com/products/accessories/wire-welding/


Regulator, MIG #770198

Rugged MIG regulator constructed of solid corrosion-resistant brass features 2"-diameter gauges, forged brass bonnet, durable Teflon® design, and dual filters for high-pressure seat protection. 100% tested for dependability. Made in the USA by Smith.

[TexHand]

Here's the converison kit for the 125, maybe Keith, Darrell, Caleb, et al, can chime in and tell you if it'd work with the 135.

http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200126974_200126974

[Zrexxer]

Here's the converison kit for the 125, maybe Keith, Darrell, Caleb, et al, can chime in and tell you if it'd work with the 135.

http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200126974_200126974
You don't need a conversion kit, the 135 has the solenoid installed. All you need is a flowgauge and a hose.