Parting out a Lincwelder 225

[Steve Crum]

I have a Lincwelder 225 portable welder in the back shop in pieces that will be gone by time the snow flys. It is about 1974 vintage and has the Onan CCK engine. The engine's short block is junk and beyond salvage, but the rest looks to be in reasonable shape. Anybody need any parts from this? What parts I don't sell will be thrown in the scrap hopper when I do a pre-winter hoe out.
I've already scarfed the leads and lugs off it but the rest is pretty much there. Make a reasonable offer on the part(s) you want plus postage. Visa and MasterCard accepted.

[tenfingers]

Are there diodes that I could use to convert my ac buzzbox to ac/dc?

If so, how much? I live in Cleveland Oh. 44135

[Steve Crum]

Are there diodes that I could use to convert my ac buzzbox to ac/dc?

If so, how much? I live in Cleveland Oh. 44135If you can give me a few details or maybe a picture I may be able to help. I'm no electrition, but if I can match up a picture to a part....

[gatkeper1]

What model Lincoln would this one be?

[jerry s]

steve have you got a carb left off of the lincwelder engine.

[Zrexxer]

I have a Lincwelder 225 portable welder
What model Lincoln would this one be?Call me crazy, but I'm guessing it's a Lincwelder 225 :rolleyes:

[Steve Crum]

steve have you got a carb left off of the lincwelder engine.
As a matter of fact I still have this whole welder and I'm ready to put it out on the junk pile. I have the carb and manifold assembly. the carb is in decent shape but needs disassembled and cleaned and a kit put in it if one is available. The butterflys are free in it, there is no apparent physial damage.
The manifold is also in good condition with no cracks and the exhaust threads are good. I'll sell this assembly for $50.00 delivered. sound fair? If so PM me or call me at 1.800.736.6432 Thanks.

http://i6.photobucket.com/albums/y201/crumsteve/ASIDCP_0001-55.jpg

http://i6.photobucket.com/albums/y201/crumsteve/ASIDCP_0002-35.jpg

http://i6.photobucket.com/albums/y201/crumsteve/ASIDCP_0003-24.jpg

[gatkeper1]

Call me crazy, but I'm guessing it's a Lincwelder 225 :rolleyes:

From what I can see, There are 34 different code/variation/model numbers of the Lincwelder 225. 26 of them have the Onan engine. Not all the electrical parts are the same you need to know what model/code the welder is. I maybe should have been more specific in my question.

[Steve Crum]

From what I can see, There are 34 different code/variation/model numbers of the Lincwelder 225. 26 of them have the Onan engine. Not all the electrical parts are the same you need to know what model/code the welder is. I maybe should have been more specific in my question.
Sorry I didn't post this earlier it is a
Lincwelder 225
Model DC-225/3-AS
Code 7185
Serial No. A-706648
The engine is an Onan CCK

[Steve Crum]

steve have you got a carb left off of the lincwelder engine.

Shipped these on Monday, hope they work out for you!

[rick32]

hi steve i picked up my parts sat.morn. they look like there right ones and better than mine thanks a lot for your help.jerry scholton

[Steve Crum]

I looked at this last night for some parts that another fellow asked about. I forgot that this has a nice 2 wheel cart under it the would work just right under a Dayton 1700 watt generator I just aquired. So when I cut the rest of this welder off the cart, I'm not handling it twice, it's going into the scrap hopper. You want parts speak up now!

[Steve Crum]

Fellow called looking for a coil for the CCK engine and some other parts off this. I don't have his name and his e-mail address doesn't work when I try to reply. These are pics of the coil and the 'parts behind the control panel'. All these are still here, but I'm not sure for how long.
http://i6.photobucket.com/albums/y201/crumsteve/ASIDCP_0001-57.jpg

http://i6.photobucket.com/albums/y201/crumsteve/ASIDCP_0002-37.jpg

http://i6.photobucket.com/albums/y201/crumsteve/ASIDCP_0004-14.jpg

http://i6.photobucket.com/albums/y201/crumsteve/ASIDCP_0005-9.jpg

http://i6.photobucket.com/albums/y201/crumsteve/ASIDCP_0006-5.jpg

[kkenner]

I looked at this last night for some parts that another fellow asked about. I forgot that this has a nice 2 wheel cart under it the would work just right under a Dayton 1700 watt generator I just aquired. So when I cut the rest of this welder off the cart, I'm not handling it twice, it's going into the scrap hopper. You want parts speak up now!

Hi Steve,

I have the same machine and could use some of the parts, I live in Hiawassee, Ga. I could use the coil pack and carburator. Could you let me know what is left? exitkeith@alltel.net

[Steve Crum]

Hi Steve,

I have the same machine and could use some of the parts, I live in Hiawassee, Ga. I could use the coil pack and carburator. Could you let me know what is left? exitkeith@alltel.net

I'm sorry man, I've been offering this since early October of last year. I sold some of the parts on ebay last month but got real tired of the emails offering to take parts off my hands if I wanted to pay the shipping etc.
The last of this went to the scrapyard 2 weeks ago as I needed the room.
Here's a link to a discussion I started on another board concerning older machines.

http://www.ytmag.com/cgi-bin/viewit.cgi?bd=ttalk&th=616278
Give it some thought.

[eddiem1]

I have a Lincwelder 225 portable welder in the back shop in pieces that will be gone by time the snow flys. It is about 1974 vintage and has the Onan CCK engine. The engine's short block is junk and beyond salvage, but the rest looks to be in reasonable shape. Anybody need any parts from this? What parts I don't sell will be thrown in the scrap hopper when I do a pre-winter hoe out.
I've already scarfed the leads and lugs off it but the rest is pretty much there. Make a reasonable offer on the part(s) you want plus postage. Visa and MasterCard accepted.

hi steve my name is ed i live by scranton pa i think the same welder model#-dc-225/3-as serial #1010783 looking for oil bath air cleaner and interested in other parts hope to hear from you email eddiem1@frontiernet.net

[hosspurvis]

do you still have the flywheel for the engine?