View Full Version : Spray arc
09-07-2002, 12:24 AM
Don't try this with your HH135. This is 3 1/2 tons entirely spray transfer. I have more on this if you want to see them. Go to my "Spray arc 2" post for the rest of the story
That has to be the job from back in March. I bet even with 1/16" diameter wire that took quite some time. How hot did that M-40 gun get with that kind of weld length? Man if you would have kept using that M-25 you would have smoked it. The M-25 gun on my MM 250 at work get so hot it starts smoking some after just running about 5 or 6 8" long fillets with the machine set at about 28 volts and 440 IPM (roughly 230 amps) with an .035 E 70S-6.
Anyway, when a man puts that much time into something it is mandatory to show it off. More pictures please.