View Full Version : Need a Converter Box for a SA200 Lincoln welder
08-07-2006, 11:50 AM
I have a Lincoln SA200 F163 Lincoln welder. It will produce 120 DC from the receptacle, but I want to convert this to 120 AC. Is there a convertor box for this model that will take care of this? Please email firstname.lastname@example.org - many thanks,
08-07-2006, 12:23 PM
I would just get a small generator sized to the amps you require.
08-07-2006, 08:19 PM
You can easily convert AC to DC. But it's not worth the trouble to go the other way.
Depending on the capacity you need an inverter may do it for you.
08-08-2006, 08:36 AM
you can buy them inverters that is from HF but most are for 12v dc to 120v ac i installed a belt drive genarator to the engine belts on the 400 amp lincoln that i have and it works great also no need to speen up engine works at idle speed also used a electric clutch so as not to burn it up when running high speed vwery simple to do
Powered by vBulletin® Version 4.2.4 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.