Where to Buy
Service & Support
Built with Hobart quality & durability, the Handler 140 is Hobart's most popular wire feed welder and the industry's best value - it is MIG ready, no additional kit required. Operating on standard 115V household current, the Handler 140 is extremely versatile and perfect for the welder that wants to work on auto body, household repairs, or even heavier farm projects that require extra welding power. A 5-position tapped voltage control selector gives you the ability to fine tune your arc offering a smooth stable arc on all thicknesses. Built with an industrial cast aluminum drive system and a heavy duty work clamp – the Hander 140 delivers a wire welding package with industrial performance.
|Material Thickness:||Welds 24 gauge up to 1/4 inch|
Running Gear/Cylinder Rack
Holds large or small cylinder (not included) with tray underneath for cables.
Small Running Gear/Cylinder Rack
For gas cylinders no larger than 7in/178mm diameter (max weight 75lbs/34kg)
H100S2-10 Replacement MIG Gun
For .030 - .035 in. (0.8 - 0.9 mm) wire. Includes 10 ft. cable.
Weatherproof nylon resists stains and mildew, and protects the finish of your welder.
Welding Wire Thickness Charts
MIG Consumables for Handler 140, 190, & 210 MVP
#500559 115V, 60 Hz
|Rated Output at 20% Duty Cycle||90 A at 18.5 VDC|
|63 A at 21 VDC|
|Current Range||25 - 140 A|
|Max. Open-Circuit Voltage||28 V|
|Wire Feed Speed Range||
40 - 700 IPM
50 - 740 IPM at no load
|Amps Input at Rated Load, 60 Hz||115 V||20|
|Dimensions||H: 12-3/8 in (315 mm)
W: 10-5/8 in (270 mm)
D: 19-1/2 in (495 mm)
|Net Weight||57 lb (26 kg)|
|Flux Cored [FCAW]||X||X|