Hobart Welders
Home » Products » Wire Feed Welders » Handler® 125 EZ
Handler 125 EZ
Printable Version
Bookmark and Share

Handler® 125 EZ Flux-Cored Wire Welder

Unique Single-Knob Control

The Handler 125 EZ has Hobart’s unique Single-Knob Control making it the quickest and easiest wire welder to set up and use. Just plug it into 115 VAC, select the mild steel thickness with the Single Knob Control and you are ready to weld. The Handler 125 EZ comes ready to weld 18 gauge–3/16 in mild steel with .030 in (0.8 mm) self-shielding flux-cored wire so no shielding gas bottle is required. Also designed to use .035 in (0.9 mm) flux cored wire with a .035 in (0.9 mm) contact tip.

Comes
complete
with:
  • Comfortable H-9A gun, 8 ft. (2.4 m)
  • Spare .030 in (0.8 mm) contact tips
  • 10 ft. (3 m) work cable with clamp
  • Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
  • Spool shaft to accommodate 4 in spools (Optional hub kit available for 8 in spools)
  • Power cord with plug
  • Weld set-up and parts information chart [PDF]
  • Owner's manual with parts lists, installation, operation, and maintenance guidelines
Power:
  • CV
  • DC
  • 1 Phase
Processes:
Flux CoredFlux Cored [FCAW]
Material Thickness: Welds 18 gauge up to 3/16 inch
Skill Level: Low
Applications:
  • Farm/Ranch
  • Light Maintenance and Repair
  • Light Fabrication
  • Operator only needs to adjust a single knob for the thickness of mild steel to be welded and he's ready to weld. One knob adjusts both the volts and wire feed speed.
  • Max output of 125 amps allows you to weld 18 gauge up to 3/16 inch steel with flux cored wire
  • Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" until trigger is pulled
  • Durable feed head with quick-release drive roll tension lever provides positive feed with adjustable tension plus easy accessibility to thread new wire
  • Short circuit protection protects unit against current overload
  • Self-resetting thermal overload protects power transformer to ensure reliability
  • Self-resetting motor protection protects wire feed system from overload, no fuses to change or circuit breaker buttons to reset
#194776 Small Running Gear / Cylinder Rack Small Running Gear/Cylinder Rack
For gas cylinders no larger than 7in/178mm diameter (max weight 75lbs/34kg)
#195157R H-9B Replacement Welding Gun
For .023 - .035 in. (0.6 - 0.9 mm) diameter wire. Includes 8 ft. cable.
#195216 Hub Kit
Add to accommodate 8 in (51 mm) spools.
#195186 Protective Cover Protective Cover
Weatherproof nylon resists stains and mildew, and protects the finish of your welder.
  Welding Wire Thickness Charts
View Chart
  Welding Gun Consumables for Handler 125 EZ
View Chart
Stock Numbers #500521 115 VAC, 60 Hz
Rated Output at 20% Duty Cycle 85 A at 17.5 VDC
60 A at 20 VDC (CSA Rating)
Current Range 30 - 125 A
Max. Open-Circuit Voltage 26 V
Amps Input at Rated Load, 60 Hz 115 V 20 15 CSA Rating
kVA 2.9 2.2 CSA Rating
kW 2.5 1.77 CSA Rating
Dimensions H: 16 7/8 in (429 mm)
W: 9 7/8 in (251 mm)
D: 12 1/8 in (308 mm)
Net Weight 50 lb (22.7 kg)

 

Processes
Recommended
Steel Stainless
Steel
Aluminum Cast Iron Copper Brass Titanium Magnesium
Alloys
Flux Cored [FCAW] X