Where to Buy
Service & Support
the Handler® 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. This welder is equipped with a built-in gas valve, and with the addition of a regulator, you're ready to MIG weld with .023-.030 in. (0.6-0.8 mm) solid wire. Use C-25 gas (75% argon/25% CO2) on 24 gauge - 1/8 in steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel.
|Material Thickness:||Welds 20 gauge up to 3/16 inch|
MIG Fixed Flow Regulator
Solid brass UL approved regulator delivers 30 cfh and has a CGA 580 connection for standard mixed gas cylinders (not recommended for 100% CO2 use). Regulator kit includes an installed 3.5 ft gas hose.
H-9B Replacement Welding Gun
For .023 - .035 in. (0.6 - 0.9 mm) diameter wire. Includes 8 ft. cable.
Add to accommodate 8 in (51 mm) spools.
Weatherproof nylon resists stains and mildew, and protects the finish of your welder.
Small Running Gear/Cylinder Rack
For gas cylinders no larger than 7in/178mm diameter (max weight 75lbs/34kg)
Running Gear/Cylinder Rack
Holds large or small cylinder (not included) with tray underneath for cables
Welding Wire Thickness Charts
MIG Consumables for Handler 125
|Stock Numbers||#500495 115 VAC, 60 Hz|
|Rated Output at 20% Duty Cycle||85 A at 17.5 VDC|
|60 A at 20 VDC (CSA Rating)|
|Current Range||30 - 125 A|
|Max. Open-Circuit Voltage||26 V|
|Wire Feed Speed Range||
50 - 400 IPM
120 - 480 IPM at no load
|Amps Input at Rated Load, 60 Hz||115 V||20||15 CSA Rating|
|kVA||2.9||2.2 CSA Rating|
|kW||2.5||1.77 CSA Rating|
|Dimensions||H: 16 7/8 in (429 mm)
W: 9 7/8 in (251 mm)
D: 12 1/8 in (308 mm)
|Net Weight||50 lb (22.7 kg)|
|Flux Cored [FCAW]||X||X|