Gas Welding Rods
Mild steel copper-coated oxy-acetylene gas welding rods are made of high-quality carbon steel of uniform and tightly controlled analysis. These rods have a melting point of 2750° F and produce quality welds of up to 65,000 PSI tensile strength. Ideal general purpose rod for welding all low-carbon steels. Available in 1 lb. packs.
| Part No. |
Type |
Diameter |
Length |
Qty. |
| #770514 |
Copper-Coated Steel (RG-45) |
3/32" |
18" |
8 |
| #770513 |
Copper-Coated Steel (RG-45) |
1/8" |
18" |
8 |
Low-fuming bronze gas welding rods are made of copper/tin alloy to produce a rod that flows easily, joins a variety of metals including cast and malleable iron, galvanized steel, bronze, copper and steel. These rods have a melting point of 1630° F and produce strong joints up to 63,000 PSI tensile strength. Bare bronze rods require flux (see #770119 below). Available in 1 lb. packs.
| Part No. |
Type |
Diameter |
Length |
Qty. |
| #770510 |
Bare Bronze |
3/32" |
18" |
8 |
| #770509 |
Bare Bronze |
1/8" |
18" |
8 |
| #770512 |
Flux-Coated Bronze |
3/32" |
18" |
8 |
| #770511 |
Flux-Coated Bronze |
1/8" |
18" |
8 |
|
|
 |
Brazing Rods (Uncoated)
Flat, high-strength, self-fluxing alloy for copper-to-copper (without flux) and copper-to-bronze with 5130 flux. Preheating is recommended for some applications.
| Part No. |
Diameter |
Length |
Qty. |
| #770205 |
1/8" |
17-1/2" |
10 |
|
|
|
Aluminum Rods
Low-temperature, self-fluxing rod for use on aluminum and magnesium. 700° F melting temperature.
| Part No. |
Diameter |
Length |
Qty. |
| #770206 |
XX" |
18-1/8" |
8 |
|
|
Brazing Flux
For use with bare bronze. Cleans well to allow for good adhesion. Comes in a 0.5 lb. canister. #770119
|
|
